Product Specifications & Dimensions
The Legacy 6-Drawer Dresser combines spacious storage with the natural elegance of hand-selected Acacia timber. Each drawer operates on quiet, full-extension ball-bearing metal glides.
| Measurement Point | Dimension |
|---|---|
| Overall Width | 56.0 inches (142 cm) |
| Overall Depth | 19.0 inches (48 cm) |
| Overall Height | 34.0 inches (86 cm) |
| Drawer Interior Width | 24.5 inches (62 cm) |
| Drawer Interior Depth | 15.0 inches (38 cm) |
| Drawer Interior Height | 6.5 inches (16.5 cm) |
| Ground Clearance | 4.5 inches (11.5 cm) |
| Unit Net Weight | 134 lbs (60.8 kg) |
Setup & Leg Attachment
The main dresser carcass ships pre-assembled to guarantee joinery precision. Only the legs require attachment:
- Unbox Safely: With two people, position the dresser box gently on its back over a padded blanket.
- Attach Legs: Thread the 4 solid wood corner legs and center reinforcement leg into the steel baseplates.
- Stand Upright: Gently lift the dresser upright into its intended location. Use the built-in leveling feet under each leg to adjust for uneven flooring.
Anti-Tip Safety Wall Anchor Kit (Mandatory)
Important Safety Warning: Unanchored furniture can pose serious tip-over hazards, particularly for small children. Always install the provided heavy-duty anti-tip restraint strap to a wall stud.
Included Kit:
- 2x Steel wall brackets
- 1x Aircraft-grade steel safety cable
- 2x 2-inch Wall Stud Screws
- 2x 1-inch Dresser Frame Screws
Installation Steps:
- Locate a wall stud behind the dresser using a stud finder.
- Attach one bracket to the solid wood top-rear frame of the dresser.
- Attach the second bracket to the wall stud at least 2 inches lower than the dresser bracket.
- Thread the steel cable through both brackets and tighten until snug.